PS10	PS20	PSL
Axis 1 (Spindle)
Spindle Weight Capacity:	136 kg (300 lbs.)	136 kg (300 lbs.)	Dual: 227 kg (500 lbs.) Single: 454 kg (1000 lbs.)
Maximum Spindle Swing Diameter:	254 mm (10 in.)	508 mm (20 in.)	Dual: 254 mm (10 in.) Single: 508 mm (20 in.)
Rated Spindle Torque:	119 Nm (1051 in./lbs.)	119 Nm (1051 in./lbs.)	150 Nm (1328 in./lbs.)
Spindle Stall Torque:	198 Nm (1752 in./lbs.)	198 Nm (1752 in./lbs.)	270 Nm (2389 in./lbs.)
Maximum Spindle Speed:	300 RPM	300 RPM	200 RPM
Spindle Height Above Floor:	787 mm (31 in.)	787 mm (31 in.)	781 mm (31 in.)
3-Jaw Chuck Saw Size:	203 mm (8 in.)	203 mm (8 in.)	203 mm (8 in.)
Live Tail Center Size:	#4 Morse taper	#4 Morse taper	#4 Morse taper
Axis 2 (Horizontal Carriage)
Nominal Winding Length Capacity:	1829 mm (72 in.) **Note: Varies depending on number of axes used, winding angle, and part configuration.	3048 mm (120 in.) **Note: Varies depending on number of axes used, winding angle, and part configuration.	1830 mm (72 in.) **Note: Varies depending on number of axes used, winding angle, and part configuration.
Usable Carriage Stroke:	2032 mm (80 in.)	3251 mm (128 in.)	2642 mm (104 in.)
Maximum Carriage Speed:	1524 mm/sec. (60 in./sec.)	1524 mm/sec. (60 in./sec.)	1524 mm/sec. (60 in./sec.)
Rated Carriage Pull:	91 kgf. (200 lbf.)	91 kgf. (200 lbf.)	45 kgf. (100 lbf.)
Carriage Stall Force:	269 kgf. (593 lbf.)	269 kgf. (593 lbf.)	221 kgf. (487 lbf.)
Carriage Drive System:	Chain and Sprocket	Chain and Sprocket	Rack and Pinion
Carriage Drive Capacity:	149 kgf. (329 lbf.)	149 kgf. (329 lbf.)	122 kgf. (269 lbf.)
Mandrel Length Capacity:	2642 mm (104 in.)	3861 mm (152 in.)	2896 mm (114 in.)
Axis 3 (Optional) (Radial Carriage)
Radial Carriage Stroke:	152 mm (6 in.)	280 mm (11 in.)	356 mm (14 in.)
Radial Carriage Speed:	610 mm/sec. (24 in./sec.)	610 mm/sec. (24 in./sec.)	610 mm/sec. (24 in./sec.)
Radial Carriage Drive System:	Ballscrew	Ballscrew	Ballscrew
Axis 4 (Optional) (Rotating Eye)
Rotating Eye Range:	+/- 100 degrees	+/- 100 degrees	+/- 90 degrees
Rotating Eye Speed:	360 deg./sec.	360 deg./sec.	720 deg./sec.
Rotating Eye Inside Diameter:	83 mm (3.25 in>)	83 mm (3.25 in>)	57 mm (2.25 in>)
Electrical
Electrical Power Requirement:	400 V, 3 Ph., 50 Hz. (480 V, 3 Ph., 60 Hz.)	400 V, 3 Ph., 50 Hz. (480 V, 3 Ph., 60 Hz.)	400 V, 3 Ph., 50 Hz. (480 V, 3 Ph., 60 Hz.)
Electrical Enclosures:	NEMA 12	NEMA 12	NEMA 12
Drives and Motors	Permanent Magnet AC Servo	Permanent Magnet AC Servo	Permanent Magnet AC Servo
General
Wind Angle Capacity:	0-90 deg.	0-90 deg.	0-90 deg.
Repeatable Winding Accuracy:	.25mm (.010 in.) (Standard deviation at 6 in. diameter, excluding tow and delivery error)	.25mm (.010 in.) (Standard deviation at 6 in. diameter, excluding tow and delivery error)	.25mm (.010 in.) (Standard deviation at 6 in. diameter, excluding tow and delivery error)
Machine Size (lg., wd., ht.):	4639 x 1829 x 2968 mm (183 x 72 x 117 in.)	5858 x 1829 x 3108 mm (231 x 72 x 122 in.)	4741 x 1635 x 2235 mm (187 x 65 x 88 in.)
Machine Weight (Approximate)	2268 kg. (5000 lbs.)	2720 kg. (6000 lbs.)	1814 kg. (4000 lbs.)
Minimum Concrete Floor Thickness:	6 inch (150 mm)	6 inch (150 mm)	6 inch (150 mm)
Machine General Configuration:	Five Spindle Horizontal	Three Spindle Horizontal	Dual Spindle Horizontal
Standard Delivery System:	Comb and ‘D’-ring, 10-roving Maximum Capacity	Comb and ‘D’-ring, 10-roving Maximum Capacity	Comb and ‘D’-ring, 10-roving Maximum Capacity
Machine Rating:	Continuous-Duty Service	Continuous-Duty Service	Continuous-Duty Service
Machine Finish:	Polyamide epoxy paint, Entec blue (RAL #5023) mainframe with moving parts yellow.	Polyamide epoxy paint, Entec blue (RAL #5023) mainframe with moving parts yellow.	Polyamide epoxy paint, Entec blue (RAL #5023) mainframe with moving parts yellow.
Special Features:	Machine comes with swivel lift eyes for handling.	Machine comes with swivel lift eyes for handling.	Machine comes with swivel lift eyes for handling.