FW600 FW1000 FW2000 FW5000
  600 1000 2000 5000
Axis 1
Spindle Weight Capacity: 137 kg (300 lbs.) 1000 kg. (2205 lbs.) 2000 kg (4410 lbs.) 11791 kg. (26000 lbs.)
Maximum Spindle Swing Diameter: 600 mm (24 in.) 700 mm (28 in.) 2000 mm (79 in.) 5000 mm (197 in.)
Rated Spindle Torque: 101 Nm (900 inch-lbs.) N/A N/A 6120 Nm (54167 in./lbs.)
Spindle Stall Torque: 327 Nm (2900 inch-lbs.) N/A N/A 12240 Nm (108333 in./lbs.)
Maximum Spindle Speed: 280 RPM 60 RPM (Other speed ranges available) 50 RPM (Other speed ranges available) N/A
Spindle Height Above Floor: 940 mm (37 in.) 1147 mm (45 in.) 1168 mm (46 in.) 2555 mm (101 in.)
3-Jaw Chuck Saw Size: 152 mm (6 in.) 203 mm (8 in.) 305 mm (12 in.) N/A
Live Tail Center Size: #2 Morse taper #4 Morse taper   N/A
Tail End Support: N/A N/A Roller N/A
Axis 2 – Horizontal Carriage
Nominal Winding Length Capacity:    1829 mm (72 in.) 6100 mm (240 in.)
**Note: Varies depending on number of axes used, winding angle, and part configuration.		 30 m (98.5 ft.)
**Note: Varies depending on number of axes used, winding angle, and part configuration.		 12000 mm (480 in.)
**Note: Varies depending on number of axes used, winding angle, and part configuration.
Usable Carriage Stroke: 1650 mm (65 in.) 7820 mm (308 in.) 32 m (105 ft.) 14275 mm (562 in.)
Maximum Carriage Speed: 1829 mm/sec. (72 in./sec.) 1800 mm/sec. (72 in./sec.) 1.5 m/sec. (5 ft./sec.) 914 mm/sec. (36 in./sec.)
Rated Carriage Pull: 45 kg. (100 lbs.) N/A N/A N/A
Carriage Pull (Continuous Rating): N/A 91 kg-f (200 lbf.) N/A 91 kg-f (200 lbf.)
Carriage Stall Force: 131 kg. (288 lbs.) N/A N/A 723 kgf. (1593 lbf.)
Carriage Drive System: Chain and Sprocket Rack and Pinion Rack and Pinion Rack and Pinion
Carriage Drive Capacity: N/A N/A N/A 353 kgf. (779 lbf.)
Radial Delivery Position Adjustment:    254 mm (10 in.) N/A N/A N/A
Mandrel Length Capacity: N/A 7620 mm (300 in.) 30.5 m (100 ft.) 14326 mm (564 in.)
Axis 3 (Optional) (Radial Carriage)
Radial Carriage Stroke: N/A 610 mm (24 in.) 610 mm (24 in.) N/A
Radial Carriage Speed: N/A 1 m/sec. (39 in./sec.) 1 m/sec. (39 in./sec.) N/A
Rated Carriage Pull: N/A N/A 91 kgf. (200 lbf.) N/A
Radial Carriage Drive System: N/A Ballscrew Ballscrew N/A
Axis 4 (Optional) (Rotating Eye)
Rotating Eye Range: N/A +/- 180 degrees +/- 180 degrees N/A
Rotating Eye Speed: N/A 60 RPM 60 RPM N/A
Rotating Eye Inside Diameter: N/A 165 mm (6.5 in>) 165 mm (6.5 in>) N/A
Rotating Eye Drive: N/A N/A Sprocket and Chain N/A
Electrical
Electrical Power Requirement: 400 V, 3 Ph., 50 Hz. (480 V, 3 Ph., 60 Hz.) 400 V, 3 Ph., 50 Hz. (480 V, 3 Ph., 60 Hz.) 400 V, 3 Ph., 50 Hz. (480 V, 3 Ph., 60 Hz.) 400 V, 3 Ph., 50 Hz. (480 V, 3 Ph., 60 Hz.)
Electrical Enclosures: NEMA 12 NEMA 12 NEMA 12 NEMA 12
Drives and Motors Indramat "Ecodrive"
Permanent magnet AC servo		 Brushless AC servo Permanent magnet AC servo Permanent magnet AC servo
General
Wind Angle Capacity: 0-90 deg. 0 - 90 deg. 0 - 90 deg. 0 - 90 deg.
Repeatable Winding Accuracy: .25mm (.010 in.)
(Standard deviation at 6 in. diameter, excluding tow and delivery error)		 .25mm (.010 in.)
(Standard deviation at 6 in. diameter, excluding tow and delivery error)		 .25mm (.010 in.)
(Standard deviation at 6 in. diameter, excluding tow and delivery error)		 .25mm (.010 in.)
(Standard deviation at 6 in. diameter, excluding tow and delivery error)
Machine Size (lg., wd., ht.): 3031 x 893 x 1243 mm (120 x 35 x 49 in.) 8661x 1970 x 1300 mm (341 x 78 x 51 in.) 34251 x 3303 mm (1349 x 140 in.) (lg., wd.) 18228 x 7881 x 5055 mm (718 x 310 x 199 in.)
Machine Weight (Approximate) N/A 2268 kg. (5000 lbs.) N/A N/A
Minimum Concrete Floor Thickness: N/A 6 inch (150 mm) 8-inch minimum thickness reinforced concrete. 8-inch minimum thickness reinforced concrete.
Machine General Configuration: Single Spindle Horizontal Single Spindle Horizontal Single Spindle Horizontal Single Spindle Horizontal
Standard Delivery System: Comb and ‘D’-ring, 12-roving Maximum Capacity Includes ‘O’-ring and comb bar, 24-roving maximum capacity (for wet winding) Comb and 'D'-ring, 24-roving Maximum Capacity Comb and 'D'-ring, 120-roving Maximum Capacity
Machine Rating: Continuous-Duty Service Continuous-Duty Service Continuous-Duty Service Continuous-Duty Service
Machine Finish: Polyamide Epoxy Paint, Gray-Blue Mainframe with Moving Parts Yellow Polyamide epoxy paint, Entec blue (RAL #5023) mainframe with moving parts yellow. Polyamide epoxy paint, Entec blue (RAL #5023) mainframe with moving parts yellow. Polyamide epoxy paint, Entec blue (RAL #5023) mainframe with moving parts yellow.
Special Features: N/A N/A Machine comes with swivel lift eyes for handling. Machine comes with swivel lift eyes for handling.